June 15, 2017
In the desert, the sand surface
can become extremely hot during the day, up to 70ºC. In order to escape these
temperatures, some desert lizards adopt a fascinating strategy: They dive a few
centimeters under the sand surface where it's much cooler (around 40º C). This
is also a good strategy to hide and to escape from predators. But diving into
the sand is a difficult task which requires a large force to overcome sand
friction. In order to dive more easily, different genera of lizards like the
fringe toed lizards and the horned lizards used rapid lateral undulations of
their body in order to fluidize the sand.
A team of researchers at the
University of Santiago has inspected how these lateral undulations ease the
penetration into granular
media such as sand. They considered a model experiment of a solid
finger penetrating different granular media made of small glass beads. Thanks
to a tiny eccentric motor, similar to those used in cell phones and joysticks,
they imposed mechanical vibrations of small amplitudes (about 10 µm) and low
frequencies (100-200 Hz) to the penetrating finder. Results of these
experiments are reported in PLOS One.
Thanks to this setup, they showed
that mechanical vibrations decrease the resistance to penetrate into a granular
medium. "The resistive force can be decreased up to ten times by the
presence of these tiny vibrations," explained Baptiste Darbois Texier, a
post doc researcher of the SMAT-C laboratory where the study has been led.
The researchers also sought the
conditions under which a drop of the resistive force occurs. They proved that
this phenomenon is controlled by the acceleration of the mechanical vibrations.
When vibrations have an acceleration higher than gravitational acceleration,
contacts between grains surrounding the intruding object are constantly broken.
In order to observe the grains' motion, the researchers tracked the
displacement of the grains in a two-dimensional version of their experiment.
"We observed that when the
vibrations have a sufficient acceleration, the grains in contact with the
intruding finger start to follow a convective motion," said Alejandro
Ibarra, a PhD student involved in the project. In such a convection zone, force
chains that usually propagate into granular media are broken and the material
is fluidized, an effect that finally reduces the force experienced by the
intruding object.
No comments:
Post a Comment
You only need to enter your comment once! Comments will appear once they have been moderated. This is so as to stop the would-be comedian who has been spamming the comments here with inane and often offensive remarks. You know who you are!